High-quality stereo modulation effects
11 typical modulation effects cover a wide variety of guitar tones
7 preset slots for saving your favorite setting
Low-noise buffer bypass reduces signal loss
To reset the pedal to factory settings, first power off the pedal. Next, press and hold the SAVE button while powering the pedal back on. The 7 LED indicators will begin to blink. Release the SAVE button LED, then wait until the indicators stop blinking to complete the factory reset. You can cancel the reset by unplugging the power supply before releasing the SAVE button.
Press the SAVE/SELECT button to switch between the 7 different reverb effects. LED indicates the currently selected effect.
When any parameter is changed that is different from the saved preset parameters, the LED indicator will blink slowly indicating the change has not yet been saved. Press and hold the SAVE button to save current settings. The LED will blink swiftly, indicating the preset has been saved successfully.
Pressing the SAVE button once quickly will change to the next effect without saving.
2*1/4” mono audio jack (Impedance value: 4.7M ohms)
2*1/4” mono audio jack (Impedance value: 100 ohms)
9V DC (Negative inside. Please ensure the polarity of power supply is correct. Voltage value should be 9V exactly.)
1 x FS05 Modulation Pedal, 1 x Safety Instruction Card, 1 x Quick Guide, 1 x Sticker
7 preset slots for saving your favourite setting.
High-quality stereo modulation effects.
True bypass reduces signal loss.
Power supply 9V 300mA, NOT Included.